Filter
Top Products
already in service. The default zone names conveyed by these seed
routers are inconsistent.
Action: One of the seed routers must be reconfigured to ensure the consistency
of the default zone names. If you reconfigure the AppleTalk router to
match the default zone name of the in-service router, no further changes
are necessary. If you reconfigure the in-service router to match the
default zone name of the AppleTalk router, however, you must restart all
network nodes and routers.
Cfg: invld zone name cfg’d for
ccg
Meaning: The circuit group specified by
ccg
has been configured as a seed port.
The directly connected network is serviced not only by this seed, but
also by another seed router already in service. The zone name lists
conveyed by these seed routers are inconsistent. While each list
contains the same number of zone entries, the lists are not identical.
Action: One of the seed routers must be reconfigured to ensure the consistency
of the zone name lists. If you reconfigure the AppleTalk router to match
the zone name list of the in-service router, no further changes are
necessary. If you reconfigure the in-service router to match the zone
name list of the AppleTalk router, however, you must restart all network
nodes and routers.
Cfg: network range incorrect for
ccg
Meaning: The circuit group specified by ccg has been configured as a seed port.
The directly connected network is serviced not only by this seed, but
also by another seed router already in service. The network ranges
conveyed by these seed routers are inconsistent.
Action: One of the seed routers must be reconfigured to ensure the consistency
of the network ranges. If you reconfigure the AppleTalk router to match
the network range of the in-service router, no further changes are
necessary. If you reconfigure the in-service router to match the network
range of the AppleTalk router, however, you must restart all network
nodes and routers.
Event Log
Messages
17
Event Log Messages
at: AppleTalk Event Messages
17-7