Filter
Top Products
Enter the Node list name in this field and leave the Source Node (high) field blank
if you want to use a Node list to establish the upper and lower range of source
node identifiers.
For additional information, refer to “Source Node (high)” earlier in this chapter. For
more information about Node lists, refer to “Node (high)” and “Node (low)” earlier
in this chapter.
Source Route
(Token Ring)
Enables or disables source routing over token ring media for the interface being
defined. Source route functionality allows the AppleTalk router to transmit and
receive frames over a token ring network extended with source routing bridges. If
the router you are configuring does not have a token-ring port, you should always
set this option to No.
Default: No
No
Disables source routing over token ring media.
Yes
Enable source routing over token ring media.
Source Sock (high)
Sets the upper boundary of the range for filtering a datagram based on the contents
of its source socket field.
Options
Leave this field blank if you do not want to filter AppleTalk source sockets.
Leave this field blank and enter the AppleTalk socket number in the Source Sock
(low) field if you are filtering a single AppleTalk source socket.
Enter the highest AppleTalk socket number in the range if you are filtering a range
of AppleTalk source sockets.
Leave this field blank and enter the name of the Socket list in the Source Sock
(low) field if you want to use a Socket list to establish the upper and lower range
of AppleTalk source socket numbers.
For additional information, refer to “Source Sock (low)” later in this chapter. For
more information about Socket lists, refer to “Socket (high)” and “Socket (low)”
earlier in this chapter.
Source Sock (low)
Sets the lower boundary of the range for filtering a datagram based on the contents
of its source socket field.
Options
Leave this field blank if you do not want to filter AppleTalk source sockets.
Enter the AppleTalk socket number in this field and leave the Source Sock (high)
field blank if you are filtering a single AppleTalk source socket.
AppleTalk
Parameters
12
AppleTalk Parameters
Parameters and Options
12-17