Filter
Top Products
exmib.fr.dlctble.entry.active.cct #
36.26.1.1.2.cct #
where cct # indicates the circuit.
addr States that address format are in use on this frame relay
interface. There are four possible values:
Q921 (1) specifies use of the first frame relay address format
with support for a 13-bit DLCI with no DE, FECN, or BECN
bit support. It is mostly obsolete with two-byte support only.
Q922March90 (2) specifies use of March 1990 draft of CCITT
specification Q922 with support for an 11-bit DLCI with no DE
bit.
Q922November90 (3) specifies use of November 90 draft of
CCITT specification Q922 with support for all of
Q922November90 plus a control byte in the extended address
format.
Q9222 (4) specifies use of the final draft of CCITT
specification Q922 with support for all of Q922November90
plus a control byte in the extended address format.
Access methods:
xmib.fr.dlctble.entry.addr.cct #
36.26.1.1.3.cct #
where cct # indicates the circuit.
addrlen States the address length, in octets, to be used over this
interface. By agreement, all PVCs within a given interface must use the
same encoding and encoding length for the DLCI (addresses). In the
case of Q922 format, the length indicates the entire length of the address
including the control portion.
exmib.fr.dlctble.entry.addrlen.cct #
36.26.1.1.4.cct #
where cct # indicates the circuit.
errthr Is the number of errors within a given monitored number of
events necessary to cause the interface to be shut down. The default is
three errors:
Managment
Information Base
18
Management Information Base Variables
cct: Circuits Information Base
18-25