Filter
Top Products
Adapter did not accept CRN command
Meaning: The terminal adapter rejected the router CRN command. The router will
bring down the circuit and not allow and more connections on this
circuit.
Action: This error indicates either a configuration error on the router or on the
terminal adapter, or an incompatablity between them. You must change
the configuration. This can happen if the V.25 bis extensions are used
and not accepted. If an adapter error is sent, the router will log it.
Adapter did not accept DIC command
Meaning: The terminal adapter rejected the router DIC command. The router will
bring down the circuit and not allow and more connections on this
circuit.
Action: This error indicates either a configuration error on the router or on the
terminal adapter, or an incompatablity between them. The user must
change the configuration. If an adapter error is sent, the router will log it.
Adapter error =
XX
Meaning: This indicates the two-character error code, XX, issued by the terminal
adapter when either a call fails or it rejects the router command.
Action: Refer to the terminal adapter manual for the meaning of the XX error
code issued.
adapter not responding with CTS line
Meaning: The router has timed out while waiting for the adapter to set Clear To
Send. When the router first enables the line, it will wait for either the
connection time or 255 seconds (if the Connection Time is set to 0) for
the adapter to bring up Clear To Send.
Action: Check the connection between the adapter and the router. Also check
the adapter documentation to be sure it is configured properly. Increase
the Connection Time parameter as necessary.
Event Log
Messages
17
Event Log Messages
cct: Circuit Event Messages
17-19