Filter
Top Products
Back to TOC Scanning from HP Precisionscan Pro 69
Scanner tab options
The Scanner tab of the Preferences dialog box controls these
options.
Preview scan when the Scan To button is pushed
When selected, a preview of the scan appears when you press the
Scan To button on the scanner. When cleared, the software starts, but
the scanner does not scan. You will start a scan from the HP
Precisionscan Pro software.
Best Quality Scaling
When selected, the highest quality scaling is applied to the final scan.
When cleared, normal quality scaling is applied, making scanning
faster.
Best Quality Sharpening
When selected, the highest quality sharpening is applied to the final
scan. When cleared, normal quality sharpening is applied, making
scanning faster.
Maximum Pixel Depth
When selected, the largest pixel bit depth is acquired from the scanner
to produce the highest quality image. When cleared, less image data is
processed, making scanning faster.
Noise Reduction
When selected, reduces the noise in the image caused by the scanner.
When cleared, noise reduction is not applied, making scanning faster.
Enable Scan Another Page Dialog
When selected, a dialog box appears during final scanning that asks
you if there are more pages of this item to scan. When cleared, the
scanner assumes each job is only one page. Applies only to .pdf, .txt,
.rtf, and .html formats.
Extend lamp time out
When selected, this setting keeps the scanner lamp and the XPA light
source (if it is connected) turned on beyond the default time out. This
feature provides the following benefits:
reduces scanning time by eliminating the lamp warm up that is
typically required between scans
keeps the XPA light source on beyond the default time out so
you can use it as a light table for viewing 35 mm slides
When cleared, the scanner lamp and the XPA light source (if
connected) time out and turn off after a period of inactivity.