Filter
Top Products
78 Using accessories Back to TOC
3 Slide up to three slides into the slide holder on the bottom side of
the XPA light source. Slides should be right-side facing you.
4 If you are scanning fewer than three slides, insert the slide light
shield after you load your last slide.
5 Place the XPA light source into the positioning plate with slides
facing down and the HP logo facing you.
6 From the HP Precisionscan Pro software, click the Scan menu,
and select XPA (Slides).
7 Before making any changes, see "Making optional adjustments for
slides or negatives" on page 81.
8 When you have finished using the XPA light source, on the Scan
menu, click Scanner Glass. Disconnect the XPA light source if you
want.
Tip The XPA light source also functions as a light table
for viewing 35 mm slides. Insert slides as shown
above.
To keep the XPA light source on beyond the default
period, select the Extend lamp time out setting in
the HP Precisionscan Pro software. See "Setting
preferences" on page 68.
HP logo here