HP (Hewlett-Packard) 4550 Printer User Manual


 
128 Printer Interfaces
EN
Parallel configuration
If your printer is not configured with a network interface card, connect
the printer to your computer using a bidirectional parallel cable
(IEEE-1284C compliant) with a Cconnector (see figure 6-1
)
plugged into the printers parallel port. The cable can be a maximum
of 10 meters (30 feet) long. For ordering information, see Printer
supplies and accessorieson page 31.
When used to describe a parallel interface, the term bidirectional
indicates that the printer is able to both receive data from the
computer and to send data to the computer through the parallel port.
Figure 6-1 Parallel cable Cconnector
Note To use the enhanced capabilities of the bidirectional parallel interface,
such asbidirectionalcommunication between thecomputerand printer,
faster transfer of data, and automatic configuration of printer drivers,
your printer driver must support these capabilities.
When you are using multiple ports, you can adjust automatic I/O
switching to maximize performance by using the timeout feature. If
data from other ports appears in the middle of your print job, increase
the I/O Timeout value. (See Setting the I/O timeouton page 61
.)