Filter
Top Products
162 Printer control panel messages
EN
TRAY X SIZE=
[SIZE]
Media has been loaded into the
specified tray.
The most recently configured
mediasizewillbedisplayed
with an asterisk next to it.
Press -V
ALUE
+ to view all the
possible media sizes.
Press S
ELECT to display the
current media size.
Press G
O
to remove the
message.
TRAY X TYPE=
[TYPE]
Media has been loaded into the
specified tray
The most recently configured
media type will be displayed
with an asterisk next to it.
Press -V
ALUE
+ to view all the
possible media types.
Press S
ELECT
to display the
current media type.
Press G
O
to remove the
message.
UNABLE TO
MOPY JOB
Memory or file system failures
would not allow a mopy job to occur.
Only one copy will be
produced.
UNABLE TO
STORE JOB
Memory or file system failures
would not allow a stored job to
occur.
Install additional memory in the
printer.
Install a hard disk in to the
printer
If a hard disk is installed, delete
previously stored print jobs.
UNSUPPORTED SIZE
IN TRAY XX
There is unsupported print media in
the specified tray.
Remove the unsupported
media size from the specified
tray.
WAIT FOR PRINTER
TO REINITIALIZE
The printer is reinitializing. The
printer returns to the
READY
state
upon completion of this process.
No action required.
WARMING UP
The printer fuser is heating up.
Printing will continue when the fuser
reaches the proper temperature.
No action required.
WASTE TONER FULL
REPLACE DRUM KIT
Thewastetonerreceptacleinthe
drum kit is full.
Replace the drum kit.
Printer control panel messages (continued)
Message Description Recommended action