HP (Hewlett-Packard) 4550 Printer User Manual


 
EN
Chapter 6 137
To configure Apple AppleTalk parameters from the
printer control panel
1 Press M
ENU
until
HP EIO 1 MENU
displays.
2 Press I
TEM
until
CFG NETWORK=NO *
displays.
3 Press V
ALUE
until
CFG NETWORK=YES
displays.
4 Press S
ELECT
once.
CFG NETWORK=YES *
displays.
5 Press I
TEM
until
CFG ETALK=NO *
displays.
6 Press V
ALUE
until
CFG ETALK=YES
displays.
7 Press S
ELECT
once.
CFG ETALK=YES *
displays.
8 Press I
TEM
.
PHASE=1
or
PHASE=2
displays.
9 Press I
TEM
to retain the value and continue, or press V
ALUE
to
change the phase parameter.
10 Press S
ELECT
to save the new value.
11 If you are finished, press G
O
to return the printer to the
READY
state.
OR
See the appropriate sections for other protocols that will be used.