HP (Hewlett-Packard) 4550 Printer User Manual


 
134 Printer Interfaces
EN
To configure the Novell NetWare parameters from the
printer control panel
1 Press M
ENU
until
HP EIO 1
or
2MENU
displays.
2 Press I
TEM
until
CFG NETWORK=NO
displays.
3 Press V
ALUE
until
CFG NETWORK=YES
displays.
4 Press S
ELECT
once.
CFG NETWORK=YES
displays.
5 Press I
TEM
until
CFG IPX/SPX=NO
displays.
6 Press V
ALUE
until
CFG IPX/SPX=YES
displays.
7 Press S
ELECT
once.
CFG IPX/SPX=YES
displays.
8 Press I
TEM
until
FRAME=AUTO
displays.
9 To configure the frame type setting protocol, press V
ALUE
to select
one of the frame types from the following table:
10 Press S
ELECT
to save the value. An asterisk (
*
)displays.
11 If you are finished, press G
O
to return the printer to the
READY
state.
OR
See the appropriate sections for other protocols that will be used.
Frame type Description
AUTO (default) All listed Novell frame types will be allowed.
EN_8023 Limits frame types to IPX over IEEE 802.3 frames.
All others will be counted and discarded.
EN_II Limit frame types to IPX over Ethernet II frames.
All others will be counted and discarded.
EN_8022 Limit frame types to IPX over IEEE 802.2 with
Ethernet frames. All others will be counted and
discarded.
EN_SNAP Limit frame types to IPX over SNAP with Ethernet
frames. All others will be counted and discarded.