Filter
Top Products
168 Printer control panel messages
EN
57.X
PRINTER ERROR
alternates with
CYCLE POWER TO
CONTINUE
An error has occurred where
X
is
indicated below:
X
Description
1 Fan motor 1 malfunction
2 Fan motor 2 malfunction
Clear the error by turning the
printer off and then on. If the
problem persists, call
HP Support.
57.3 FAN ERROR
alternates with
CLOSE UPPER
FRONT DRAWER
The upper front drawer may not be
completely closed preventing a
connection to fan motor 3.
Verify that the upper front
drawer is completely closed.
58.X
PRINTER ERROR
alternates with
CYCLE POWER TO
CONTINUE
A temporary printing error occurred. Clear the error by turning the
printer off and then on. If this
message persists, call
HP Support.
59.X
PRINTER ERROR
alternates with
CYCLE POWER TO
CONTINUE
A temporary printing error occurred. Clear the error by turning the
printer off and then on. If this
message persists, call
HP Support.
62 NO SYSTEM
There is a printer firmware error. Clear the error by turning the
printer off and then on. If the
problem persists, call
HP Support.
62.X
PRINTER ERROR
Indicates a problem with internal
memory.
X
indicates the location as
follows:
X Description
0 Internal memory
1 Memory in DIMM slot 1
2 Memory in DIMM slot 2
3 Memory in DIMM slot 3
Clear the error by turning the
printer off and then on. If the
problem persists, call
HP Support.
64 PRINTER ERROR
alternates with
CYCLE POWER
A temporary printing error occurred. Clear the error by turning the
printer off and then on. If the
problem persists, call
HP Support.
Printer control panel messages (continued)
Message Description Recommended action