Filter
Top Products
EN
Chapter 8 171
TOO MANY PAGES
IN JOB TO FINISH
The finisher device attempted
to finish a job that contained
more pages than the finisher
device was capable of
processing.
Remove the excess pages and
retry finishing the print job.
66.XX.YY
FINISHER FAILURE
alternates with
CHECK CABLES
AND CYCLE POWER
A failure has occurred in an
external paper handling output
device.
Make sure the cables from the
external paper handling output
device are securely plugged
into the printer. Clear the error
by turning the printer off and
then on.
66.00.XX INPUT
DEVICE FAILURE
alternates with
CHECK CABLES
AND CYCLE POWER
A failure has occurred in an
external paper handling output
device.
Make sure the cables from the
external paper handling input
device are securely plugged
into the printer. Clear the error
by turning the printer off and
then on.
66.00.XX OUTPUT
DEVICE FAILURE
alternates with
CHECK CABLES
AND CYCLE POWER
A failure has occurred in an
external paper handling output
device.
Make sure the cables from the
external paper handling output
device are securely plugged
into the printer. Clear the error
by turning the printer off and
then on.
FINISHER LOW ON
FINISHING AGENT
The finishing devices is
running out of its finishing
material
Refill the finishing device with
the specified finishing agent.
Control panel messages for external devices (continued)
Message Description Recommended action