Filter
Top Products
EN
Chapter 2 43
Configuration menu
The Configuration menu is used to set general printer default settings.
CAUTION Hewlett-Packard recommends that configuration settings only be
changed by a system administrator. Configuration settings seldom
need to be changed.
*Denotes default setting
Menu item Values Description
POWERSAVE TIME 1 MIN
15 MIN
30 MIN*
1HR
2 HRS
4 HRS
The length of time before the
printer goes into power-saving
mode.
CLEARABLE
WARNINGS
JOB*
ON
If ON, message is displayed until
G
O
is pressed. If JOB, message is
displayed until end of print job.
AUTO CONTINUE ON*
OFF
Determines whether the printer
continues printing when certain
errors occur. IfON, printer returns to
the READY state. If OFF,printer
remains offline until G
O
is pressed.
JAM RECOVERY AUTO*
MANUAL
Printer attempts to recover from
jams and reprints affectedpages. If
AUTO, printer returns to the READY
state. If MANUAL, printer remains
offline until G
O
is pressed.
Enabling this feature consumes
printer memory.
PRINT PS ERRORS OFF*
ON
Prints out an error page when
emulated PostScript errors occur. If
ON, printer returns to the READY
state. If OFF, printer remains offline
until G
O
is pressed.
RAM DISK OFF*
ON
Determines if a RAM disk is
installed and whether or not it is
activated.
RAM DISK SIZE= Displays the size (in MB or GB) of
the activated RAM disk (if
installed).
QUICK COPY
JOBS=
Displays the numberof Quick Copy
jobs saved in printer memory.
HELD JOB
TIMEOUT
OFF*
ON
Sets the length of time the printer
will save aheld job in memory prior
to deleting it.
PERSONALITY AUTO*
PCL
PS
The personality (language) the
printer uses to process a print job.