Filter
Top Products
208 Solving problems with the printer
EN
Dull or dark transparencies
● If the transparency colors are dull or dark, ensure the
transparencies meet the specifications for this printer (part
number C2934A for letter, and C2936A for A4).
● The selected colors are undesirable when printed. Select different
colors in your software application or printer driver.
● Spots and smudges appear in the background areas of
transparencies when they are projected. Oil from your hands can
cause spots or smudges on transparencies. Reprint the
transparencies, being careful not to touch the surface of the
transparencies.
● You are using a reflective overhead projector. Use a standard
overhead projector.
Rippled or wavy transparencies
You are using transparencies that do not meet the specifications for
this printer. Use only transparencies that meet the media
specifications for this printer (see page 67
).
Incorrect image on transparencies
This might occur even though the correct media is loaded in the
correct tray. Toner might not adhere to the media and an image might
show up on pages where it isn’t meant to appear. For more
information see “Ghosting” on page 203
.
Noimage
available
Noimage
available