Filter
Top Products
EN
Chapter 3 75
Figure 3-1 Rear view
(shown with the optional 500-sheet paper feeder and duplex printing
accessory)
1 Top output bin
2 Rear output bin
Selecting media by type
If you want to select media for your job by type of media rather than by
the input tray (source), you must first configure a printer tray for the
media type you are using, and then specify that media type in the
printer driver.
Selecting media by type rather than source is similar to locking out
trays and helps protect special media from accidental use. For
example, if a tray is configured for letterhead, and you specify in your
driver to print on plain paper, the printer will not pull the letterhead
from that tray. Instead, it will pull from a tray that has plain paper
loaded and that has been configured for plain paper on the printer
control panel.
2
1