Filter
Top Products
The phone cord that came with my HP All-in-One is not long enough
Solution If the phone cord that came with the HP All-in-One is not long enough,
you can use a coupler to extend the length. You can purchase a coupler at an
electronics store that carries phone accessories. You will also need another
phone cord, which can be a standard phone cord that you might already have in
your home or office.
Tip If the HP All-in-One came with a 2-wire phone cord adaptor, you can
use it with a 4-wire phone cord to extend the length. For information on
using the 2-wire phone cord adaptor, see the documentation that came
with it.
To extend your phone cord
1. Using the phone cord supplied in the box with the HP All-in-One, connect
one end to the coupler, then connect the other end to the port labeled 1-LINE
on the back of the HP All-in-One.
2. Connect another phone cord to the open port on the coupler and to the
telephone wall jack, as shown below.
1 Telephone wall jack
2 Coupler
3 Use the phone cord supplied in the box with the HP All-in-One to connect to the
"1-LINE" port
Operational troubleshooting
This section contains information on paper and print cartridge troubleshooting.
The troubleshooting section in the onscreen Help contains more complete
troubleshooting tips for some of the most common issues associated with the HP All-
in-One. For more information, see Use the onscreen Help.
If you have Internet access, you can get help from the HP website at www.hp.com/
support. The website also provides answers to frequently asked questions.
Paper troubleshooting
To help avoid paper jams, only use paper types that are recommended for the HP All-
in-One. For a list of recommended papers go to www.hp.com/support.
User Guide
127
Troubleshooting