Filter
Top Products
Set the HP All-in-One to be invisible to Bluetooth devices
You can set the HP All-in-One to be either Visible to all Bluetooth devices (public) or
Not visible to any (private).
● Visible to all: Any Bluetooth device within range can print to the HP All-in-One.
● Not visible: Only Bluetooth devices that have stored the device address of the
HP All-in-One can print to it.
Note The HP All-in-One ships with a default accessibility level of Visible to all.
To set the HP All-in-One to be Not visible
1. Press Setup on the control panel of the HP All-in-One.
2. Press 9, and then press 4.
This selects Bluetooth and then selects Visibility.
3.
Press
to select Not visible, and then press OK.
The HP All-in-One is inaccessible to Bluetooth devices that have not stored its
device address.
Reset Bluetooth settings on the HP All-in-One
You can reset all of the Bluetooth settings on the HP All-in-One to the factory defaults.
Note Only select Reset Bluetooth if you want all of the HP All-in-One
Bluetooth settings returned to factory defaults.
To reset the Bluetooth settings
1. Press Setup on the control panel of the HP All-in-One.
2. Press 9, and then press 6.
This selects Bluetooth and then selects Reset Bluetooth.
Use a Bluetooth
®
connection to print from your computer
A Bluetooth connection provides a quick and easy way to print images from a
Bluetooth-enabled computer without using a cable. With a Bluetooth connection you
can access many of the same printing features as with a USB connection. For
example, you can check the printer status, as well as the estimated amount of ink
remaining in your print cartridges.
Note The only software functionality available with a Bluetooth connection is
printing. Scanning and software-based faxing cannot be done over a Bluetooth
connection. However, stand-alone copy and fax functions are still available.
Before you print, you must connect an HP bt450, Printer and PC Adapter with
Bluetooth
®
Wireless Technology to the HP All-in-One.
Windows users
You must have Windows XP and either the Microsoft Bluetooth
®
Protocol Stack or the
Widcomm Bluetooth
®
Protocol Stack installed in order to connect the HP All-in-One. It
Chapter 3
26
HP Officejet 6300 All-in-One series
Finish setup