Filter
Top Products
4
Load originals and load paper
You can load many different types and sizes of paper in the HP All-in-One, including
letter or A4 paper, photo paper, transparencies, and envelopes. By default, the HP All-
in-One is set to detect the size and type of paper you load in the input tray
automatically and then adjust its settings to generate the highest quality output for that
paper.
If you are using special papers, such as photo paper, transparency film, envelopes, or
labels, or if you experience poor print quality using the Automatic setting, you can
manually set the paper size and type for print and copy jobs.
● Load originals
● Choose papers for printing and copying
● Load paper
● Avoid paper jams
Load originals
You can load an original for a copy, fax, or scan job in the automatic document feeder
or on the glass. Originals that are loaded in the automatic document feeder will
automatically be fed into the HP All-in-One.
● Load an original in the automatic document feeder
● Load an original on the glass
Load an original in the automatic document feeder
You can copy, scan, or fax a single- or multiple-page letter-, A4- (up to 35 pages of
plain paper), or legal-size document (up to 20 sheets of plain paper) by placing it in
the document feeder tray.
Caution Do not load photos in the automatic document feeder; this might
cause damage to your photos.
Note Some features, such as the Fit to Page copy feature, do not work when
you load your originals in the automatic document feeder. You must load your
originals on the glass.
The automatic document feeder holds a maximum of 35 sheets of plain paper.
To load an original in the document feeder tray
1. Load your original, with the print side up, into the document feeder tray. Slide the
paper into the automatic document feeder until you hear a beep or see a
message on the display indicating that the HP All-in-One detected the pages you
loaded.
User Guide
57
Load originals and load paper