Filter
Top Products
The name you entered will appear on your Bluetooth device when you
connect to the HP All-in-One to print.
3. Press OK to exit the Setup menu.
Set Bluetooth security for the HP All-in-One
You can enable printer security settings through the Bluetooth menu on the HP All-in-
One. Press Setup on the control panel, and select Bluetooth from the Setup Menu.
From the Bluetooth menu, you can:
● Require passkey authentication prior to someone printing to the HP All-in-One
from a Bluetooth device.
● Make the HP All-in-One visible or invisible to Bluetooth devices that are within
range.
● Use a passkey to authenticate Bluetooth devices
● Set the HP All-in-One to be invisible to Bluetooth devices
● Reset Bluetooth settings on the HP All-in-One
Use a passkey to authenticate Bluetooth devices
You can set the security level of the HP All-in-One to either Low or High.
● Low: The HP All-in-One does not require a passkey. Any Bluetooth device within
range can print to it.
Note The default security setting is Low. Low level security does not
require authentication.
● High: The HP All-in-One requires a passkey from the Bluetooth device before
allowing the device to send a print job to it.
Note The HP All-in-One ships with a predefined passkey that is set to four
zeroes "0000".
To set the HP All-in-One to require passkey authentication
1. Press Setup.
2. Press 9, and then press 3.
This selects Bluetooth and then selects Passkey.
3. Use the keypad to enter a new passkey.
Note The passkey must be 1 to 4 characters long, and can only consist
of numbers.
4. When you have finished entering your passkey, press OK.
The Bluetooth menu appears.
5. Press 5 to select Security Level.
6. Press OK to select High.
High level security requires authentication.
Passkey authentication is now set for the HP All-in-One.
User Guide
25
Finish setup