Filter
Top Products
4. Touch Distinctive Ring.
5. A message appears stating that this setting should not be changed unless you have multiple numbers on
the same telephone line. Touch Yes to continue.
6. Do one of the following:
• Touch the ring pattern assigned by your telephone company to fax calls.
- Or -
•Touch Ring Pattern Detection, and then follow the instructions on the printer control panel.
NOTE: 1 If the Ring Pattern Detection feature cannot detect the ring pattern or if you cancel the feature
before it finishes, the ring pattern is automatically set to the default, which is All Rings.
NOTE: 2 If you are using a PBX phone system that has different ring patterns for internal and external
calls, you must call the fax number from an external number.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is Tone. Do not change the
setting unless you know that your phone line cannot use tone dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
To set the dial type
1. Touch
(Right arrow), and then touch Setup.
2. Touch Fax Setup, and then touch Basic Fax Setup.
3. Touch
(Down arrow), and then touch Dial Type.
4. Touch to select Tone Dialing or Pulse Dialing.
Set the redial options
If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the printer
attempts to redial based on the settings for the busy-redial and no-answer-redial options. Use the following
procedure to turn the options on or off.
• Busy redial: If this option is turned on, the printer redials automatically if it receives a busy signal. The
factory-set default for this option is On.
• No answer redial: If this option is turned on, the printer redials automatically if the receiving fax machine
does not answer. The factory-set default for this option is Off.
To set the redial options
1. Touch
(Right arrow), and then touch Setup.
2. Touch Fax Setup, and then touch Advanced Fax Setup.
3. Touch Busy Redial or No Answer Redial, and then select the appropriate options.
Set the fax speed
You can set the fax speed used to communicate between your printer and other fax machines when sending and
receiving faxes.
If you use one of the following, setting the fax speed to a slower speed might be required:
• An Internet phone service
• A PBX system
• Fax over Internet Protocol (FoIP)
• An integrated services digital network (ISDN) service
Change fax settings 51