HP (Hewlett-Packard) D7200 Series Printer User Manual


 
Memory card error
Cause: There are two or more memory cards inserted into the HP Photosmart at
the same time.
Solution: Remove all but one memory card. The HP Photosmart reads the
remaining memory card and displays the first photo stored on the memory card.
Cause: You have inserted a Compact Flash memory card backwards or upside
down.
Solution: Remove the memory card and reinsert it correctly. The label of the
Compact Flash card faces up and should be readable as you insert it into the slot.
Cause: You have not fully inserted the memory card.
Solution: Remove the memory card and reinsert it in the memory card slot until it
stops.
Disconnected
Cause: Several situations can cause this error message to appear.
Your computer is not turned on.
Your computer is not connected to the HP Photosmart.
The software that came with the HP Photosmart was not installed correctly.
The software that came with the HP Photosmart is installed, but it is not running.
Solution: Make sure your computer is turned on and is connected to the
HP Photosmart. Also make sure you installed the software that came with the
HP Photosmart.
For more information, see:
•“
Communication problems over a USB connection” on page 97
•“
Wired network setup troubleshooting” on page 109
Out of disk space
Cause: There is not enough available memory on your computer to perform the
task.
Solution: Close some applications and try the task again.
Card access error
Cause: There are two or more memory cards inserted into the HP Photosmart at
the same time.
Solution: Remove all but one memory card. The HP Photosmart reads the
remaining memory card and displays the first photo stored on the memory card.
Errors 137
Troubleshooting