Filter
Top Products
To view and print the network settings
1. Touch Setup on the display.
2. Touch Network.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
3. Touch View Network Settings Menu.
4. Do one of the following:
• To display wired network settings, touch Display Wired Summary.
• To print the network configuration page, touch Print Network Configuration
Page.
Related topics
“
Network configuration page definitions” on page 30
Restore network defaults
You can reset the network settings to what they were when you purchased the
HP Photosmart.
To restore network defaults
1. Touch Setup on the display.
2. Touch Network.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
3. Touch Restore Network Defaults.
4. Touch Yes or No.
Change advanced network settings from the control panel settings
The advanced network settings are provided for your convenience. However, unless you
are an advanced user, you should not change any of these settings.
This section contains the following topics:
•
Set link speed
•
Change IP settings
Set link speed
You can change the speed at which data is transmitted over the network. The default is
Automatic.
Connect to a network 27
Finish setup