Filter
Top Products
4 Finish setting up the
HP Photosmart
After you have completed the steps in your Setup Guide, refer to this section to help you
finish setting up the HP Photosmart. This section contains important setup-related
information for your device, including information on setting preferences.
This section contains the following topics:
•
Set your preferences
•
Computer connection information
•
Connect to a network
Set your preferences
You can change the settings on the HP Photosmart so that it behaves according to your
preference. For example, you can set general device preferences, such as the language
used to display messages. You can also restore the device settings to what they were
when you purchased your device. This will erase any new defaults you have set.
This section contains the following topics:
•
Set your language and country/region
•
Adjust the volume
•
Set the default paper tray for PictBridge/DPOF/UPnP printing
•
Enable faster browsing of photos
•
Set the paper tray for printing from a Bluetooth device
•
Restore the factory defaults
•
Play a slideshow on the display
Set your language and country/region
The language setting determines which language the HP Photosmart uses to show
messages on the display. The country/region setting determines the default paper sizes
and layouts for printing. You can change these settings at any time by using the following
procedures.
To set the language
1. Touch Setup on the display.
2. Touch Preferences.
3. Touch Set Language.
4. Touch the language you want to select.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
5. When prompted, touch Yes to confirm your selection, or touch No to choose another
language.
Finish setting up the HP Photosmart 13
Finish setup