Filter
Top Products
Solution: Remove any objects that are blocking the print head assembly.
To clear the print head assembly
1. Open the ink cartridge door by lifting from the front center of the device, until the
door locks into place.
2. Remove any objects that are blocking the print head assembly, including any
packing materials.
3. Turn the HP Photosmart off, then turn it on again.
4. Close the ink cartridge door.
Print head failure
Cause: The print head assembly or the ink delivery system has failed and the
HP Photosmart can no longer print.
Solution: Contact HP support. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Alignment failed
Cause: An incorrect type of paper is loaded in the input tray.
Solution: If you have color or photo paper loaded in the input tray when you align
the printer, the alignment might fail. Load unused plain white letter or A4 paper into
the input tray, and then try the alignment again. If the alignment fails again, you might
have a defective sensor.
Contact HP support. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Cause: The print head assembly or sensor is defective.
Solution: Contact HP support. Go to:
Chapter 12
148 Troubleshooting
Troubleshooting