Filter
Top Products
3-3
Using the Online Help
To Install the Online Help
3 Using the Online
Help
To Install the Online Help on a Workstation
If you have HP-UX superuser permission, you can install the analyzer help
on an HP series 700 workstation running HP-UX 9.05.
1 Mount the CD-ROM onto your file system by typing:
/bin/mkdir /cdrom
/etc/mount <cdrom_device_file> /cdrom
See your system administrator if you are unsure of the CD-ROM device
file name.
2 Run the HP-UX update utility by typing:
/etc/update
The update utility Main Menu is displayed.
3 Select “Change Source or Destination” by using the arrow keys to
highlight the option; then pressing either Enter or F4.
The Change Source or Destination window is displayed.
4 Select “From Tape Device to Local System” as the Update from Source
to Destination by using the arrow keys to highlight the option; then
pressing either Enter or F4.
The From Tape Device to Local System window is displayed.
5 In the Source field, type /cdrom/HELP/HYPHELP/HELP.PKG
6 Press F4.
The Main Menu is redisplayed.
Note This installation modifies the following files:
• /etc/inetd.conf
• /etc/services