Filter
Top Products
Setting Up the Analyzer
To Connect the Analyzer to a Computer
1-8
To Connect the Analyzer to a Point-to-Point
Ethernet Interface
Caution Make sure at least 3 cm of clear space is left between the analyzer
ventilation openings and other objects.
If there is a boot failure, the analyzer attempts to boot from the host
computer using the configured boot host, and analyzer IP address.
2
Connect the
network cable
(E5200-64005)
to the PCMCIA
LAN cable.
5
Connect the analyzer to a
mains power outlet.
3
Connect the analyzer to
the notebook PC using
the PCMCIA LAN cable.
4
Connect the AC adapter
to the notebook PC.
1
Connect the cross-
over cable
(E5200-64006) to
the network
cable (E5200A-
64005).