Filter
Top Products
Setting Up the Analyzer
To Unpack the Analyzer
1-4
Analyzer Software
All of the required software is preinstalled. If you have the HP Broadband
Service Analyzer (E5200A), the application software is pre-installed on
the analyzer.
If you have the HP Broadband Service Analyzer with the notebook PC
(E5200A option 050), the application software is pre-installed on the
analyzer, and the following software is pre-installed on the notebook PC:
• analyzer software (as backup)
• interface pod software (as backup)
• online help
• MS-DOS (Ver. 6.2)
• Microsoft Windows (Ver. 3.1)
• PC-Xware (Ver. 2.1)
• Acadia/VxD (Ver. 2.2)
• Borland C++ (optional—supplied with the Broadband Series UPE
Conversion Toolkit p/n E5190A)
You will also receive a set of diskettes containing the PC based online help,
and/or a CD-ROM that contains the
• analyzer software
• notebook PC software
• PC based online help
• UNIX based online help
Caution When you receive your analyzer, you should make a complete backup of
the notebook PC hard disk. This will save you time in the future if you
ever have any problems with the notebook PC hard disk. For backup
procedures, refer to “To Back Up Files” on page 1-24.
Caution Do not load any non-analyzer related software on the notebook PC. This
may cause damage to the analyzer’s software.
You can also use the analyzer with an HP-UX workstation as the display
server.
The HP Broadband Service Analyzer is certified to operate only with the
supplied notebook PC or an HP-UX workstation. If you have any problems,
contact your local HP representative.