Filter
Top Products
2-13
Using the Analyzer
To Log In to the Analyzer
2 Using the Analyzer
If at any time you cannot log in to the analyzer, reboot the notebook PC in
one of the following ways:
• Press the Reset button underneath the PC.
• Press Ctrl-Alt-Del.
If you still cannot log in, refer to the Worldwide Support card for
information about how to obtain customer support.
To Log In to the Analyzer’s Graphical User Interface on
an HP-UX Workstation
1 Type xhost +<analyzer hostname>
2 Type telnet <analyzer hostname> 5200
The analyzer hostname is assigned by your system administrator.
The HP Broadband Service Analyzer Login window displays.
To Log In to the Command Line Interface
Double-click one of the following icons:
Use this icon to start the Command Line
Interface to the HP Broadband Service
Analyzer (see the Macro Online Help). The
terminal is connected through a Local Area
Network (LAN).
Use this icon to start the Command Line
Interface to the HP Broadband Service
Analyzer (see the Macro Online Help). The
terminal is connected through the serial port.
HP Analyzer
Terminal
HP Analyzer
Terminal over
SLIP