Filter
Top Products
1-23
Setting Up the Analyzer
To Back Up and Restore Files
1 Setting Up the
Analyzer
To Back Up and Restore Files
When you use the HP Broadband Service Analyzer, you create files that
are stored on the analyzer’s hard disk. You should back up these files
• after you connect and change the configuration of the analyzer
• on a regular basis to safeguard against data loss
See the Acadia/VxD Installation, Overview and Command Reference
for more detailed information about how to NFS mount a file system.
When you first start the notebook PC, you should create a bootable
diskette in case there is a complete hard disk crash (see “To Create a
Bootable Diskette” on page 1-23). You should also backup the notebook
PC hard disk (see “To Back Up Files” on page 1-24).
To Create a Bootable Diskette
1 Place a formatted diskette in drive A.
2 At the C:\> prompt, type sys A:
3 Copy the following files from the C:\DOS directory onto the diskette:
• format.com
• msbackdb.ovl
• msbackdr.ovl
• msbackfb.ovl
• msbackfr.ovl
• msbackup.exe
• msbackup.hlp
• msbackup.ovl
• msbconfg.hlp
• msbconfg.ovl