Filter
Top Products
4-11
System Administration
To Upgrade the Analyzer Software
4 System
Administration
To Upgrade Software Using Diskettes
From the Upgrade Software Menu, type 1; then press Enter to display the
Upgrade Software Using Diskettes screen.
Press Enter. When you have correctly installed the software, the message,
Upgrade complete appears.
If the upgrade does not work, the message Upgrade failed appears. If
you cannot reboot the system, that is, you cannot even access the
previous version of the software, restore the latest version of the software
from a backup. See “To Restore Files” on page 1-25.
Switch off the analyzer power for five seconds (see “To Switch the
Analyzer On and Off” on page 1-22).
Caution The upgrade does not take place until after you reboot the analyzer.
Log in to the analyzer (see “To Log In to the Analyzer” on page 2-11);
then back up the analyzer to the notebook PC to the c:\usr directory
(see “To Back Up Files from the Analyzer to a Notebook PC” on
page 1-24).
1
Insert each
diskette
provided into
drive A on the
PC according to
the instructions
on the screen.
2
Press Enter.