Filter
Top Products
Using the Analyzer
To Inject Alarms and Errors
2-50
To Inject ATM and AAL errors
Watch the results of the injected alarms or errors. The numbers of errors
and OAM cells injected is shown at the top of the Protocol Alarms/Errors
window. If you are using an external loopback or transmit loopback mode,
you can also monitor the errors and alarms by watching the Alarm and
Error indicators at the top of the main screen.
5
Click the bits you
want to error.
6
Click the On button to
start injecting errors, or
click the Error On For or
the Error Off For button
to transmit errors for a
specified number of cells.
4
If required, select the
part of the cell to error.
3
Select the type of error.
2
Select the
channel(s) on
which to simulate
1
Click the Errors tab.