Filter
Top Products
1-17
Setting Up the Analyzer
To Connect the Analyzer to a Computer
1 Setting Up the
Analyzer
To Connect the Analyzer
To Set the Remote Modem to Auto Answer
Set the remote modem (connected to the analyzer) to auto answer by
setting the S parameter zero (SO) to a value greater than zero. See your
modem’s user’s guide.
Note You can either connect the notebook PC’s serial port to an external modem, or you can
connect the PCMCIA internal modem directly to the telephone socket.
2
Connect the
analyzer to a mains
power outlet.
1
Connect the
analyzer’s serial
port to the modem
(RS-232C US/Euro
modem cable p/n
24542M—part not
supplied).
3
Connect the notebook
PC’s serial port to the
modem (RS-232C
US/Euro modem cable
p/n 24542M—part not
supplied), or connect
the PCMCIA internal
modem to the telephone
outlet.