Filter
Top Products
Using the Analyzer
To Configure the Analyzer and Ports
2-18
To Configure the Analyzer and Ports
After you log in you must configure the analyzer for the type of test you
want to perform, then specify the ATM and physical layer configuration for
each port.
To Configure the Analyzer
1 From the Configure menu, select the appropriate port.
2 Select the required configuration option:
• Select full duplex for intrusive tests.
• Select transmit loopback for diagnostic tests.
• Select receive loopback for non-intrusive tests.
• Select regenerator for intrusive tests for optical interface pods.
The default configuration option is full duplex. These options are also
available from the Simulator.
To set the measurement system and the reference clock, see the User
Online Help.
To Configure a Port
The analyzer auto-configures each port after you switch on the power and
insert an interface pod, and when you click the Reset button on the main
screen. When you configure a port, the analyzer changes the reference
clock to match the configuration. You can configure the analyzer manually
to override the automatic settings.