Filter
Top Products
1-9
Setting Up the Analyzer
To Connect the Analyzer to a Computer
1 Setting Up the
Analyzer
To Connect the Analyzer to a Point-to-Point
Serial Interface
To Record the System Administration Information
After you have connected the analyzer, switch on the analyzer (see “To
Switch the Analyzer On and Off” on page 1-22); then use the system
administration functions of the analyzer to set the
• system administrator password (see “To Change a Password” on
page 4-6)
• required users (see User Online Help)
• date, time, and time zone (see “To Set the System Date, Time, and
Time Zone” on page 4-7)
• printer (see User Online Help)
1
Connect the analyzer to the
notebook PC’s serial
connector. If this cable is
not supplied, use cable p/n
24542U.
2
Connect the
analyzer to a mains
power outlet.