Filter
Top Products
2-51
Using the Analyzer
To Inject Alarms and Errors
2 Using the Analyzer
To Inject Physical Layer Alarms and Errors
The analyzer can generate physical layer alarms and errors, and
frameword errors.
Display the Protocol Alarms/Errors window in either of the following
ways:
• From the Simulate menu, select the required port; then select
Physical Alarms/Errors.
• Click the Simulate tab for the required port to display the Simulator;
then click the Physical Alarms/Errors button.
To Inject Physical Alarms
The number of alarms you can select at one time depends on the interface
pod installed.
1
Click the Alarms tab.
2
Click the On
button for
the alarms
you want to
inject.