Filter
Top Products
1-13
Setting Up the Analyzer
To Connect the Analyzer to a Computer
1 Setting Up the
Analyzer
To Test for Network Connectivity
If you have connected the analyzer to a workstation, do the following:
• Use the UNIX ping command to verify that the analyzer is up and
running on your network. The syntax of the ping command may vary
from site to site. See your system administrator or the UNIX online
man pages for more details. If you cannot ping to the analyzer, check
all of the cable connections and configuration parameters.
• Check that you have given xhost authority for the analyzer to connect
to your X-display. See your system administrator or the UNIX online
man pages for more details.
If you are using the notebook PC, click the Ping icon in the Acadia/Vxd
program group. Ping the notebook PC and the analyzer separately using
their hostnames.
To Install the Online Help
If you have HP-UX superuser permission, you can install the analyzer
help on an HP series 700 workstation running HP-UX 9.05.
1 Mount the CD-ROM onto your file system by typing:
/bin/mkdir /cdrom
/etc/mount <cdrom_device_file> /cdrom
See your system administrator if you are unsure of the CD-ROM device
file name.
2 Run the HP-UX update utility by typing:
/etc/update
The update utility Main Menu is displayed.
Note This installation modifies the following files:
• /etc/inetd.conf
• /etc/services