Filter
Top Products
104 Troubleshooting the HP JetDirect Print Server
EN
5 DLC/LLC configuration
messages (Table 7.4)
Status for the DLC/LLC protocol.
6 TCP/IP status
information (Table 7.3)
TCP/IP status, IP address, BOOTP
server, and other configuration
information.
7 Apple EtherTalk status
information (Table 7.3)
(Ethernet only) If the AppleTalk protocol
is working properly, or if it is enabled.
Use NET and NODE to verify the printer
is communicating correctly on the
network. ZONE verifies you selected
the correct printer. P2 (below READY)
indicates you are using the Phase 2
EtherTalk protocol, which should be the
same on your printer as on your Mac
OS.
Table 6.3 Ethernet and Token Ring Configuration Pages
(External Print Servers) (2 of 2)
Item Description Troubleshooting Information