Filter
Top Products
EN
TCP/IP Configuration 53
Table 3.4 Print Server Parameters (1 of 2)
JetDirect Internal
Print Server Menu
Item
Description
CFG NETWORK=NO* Selects whether or not you want to access the
JetDirect menu items. NO* (default) indicates you
do not want to access the menu. You must change
this to YES* each time you want to access the
JetDirect EIO menu.
IPX/SPX=ON*
DLC/LLC=ON*
TCP/IP=ON*
ETALK=ON*
Identifies whether the protocol stack is enabled or
disabled. The default is ON*. Change this to OFF*
to disable this protocol.
CFG IPX/SPX=NO* Selects whether you want to access the IPX/SPX
menu and set IPX/SPX protocol parameters.
In the IPX/SPX menu, you can specify the
Frame
Type
parameter used on your network.
■
The default is AUTO, to automatically set and
limit the frame type to the one detected.
■
For Ethernet cards, frame type selections
include EN_8023, EN_II, EN_8022,
EN_SNAP.
■
For Token Ring cards, frame type selections
include TR_8022, TR_SNAP.
In the IPX/SPX menu for Token Ring cards, you
can also specify
NetWare Source Routing
parameters, which include SRC RT=AUTO
(default), OFF, SINGLE R, or ALL RT.