Filter
Top Products
EN
TCP/IP Configuration 47
Note The Present Config field in the
Telnet Configuration
menu describes how the HP JetDirect print server
is configured. For example, if the HP JetDirect
print server is configured by your BOOTP server,
the menu will contain the line, “present
config=BOOTP.” Other possible configuration types
are RARP, DHCP, or Telnet/Front Panel.
Note On Windows systems
local echo
should be
selected. To determine if
local echo
is enabled,
perform the following:
●
Windows 95/98/NT: Click
Terminal
and
Preferences
.
●
Windows 2000: Run Microsoft Telnet and enter
the
display
command.
On UNIX systems, it is not necessary to select
local
echo
.
4. At the Telnet prompt “
>
” type:
parameter: value
then press
[Enter]
, where
parameter
refers to the configuration
parameter you are defining, and
value
refers to the definitions
you are assigning to that parameter. Each parameter entry is
followed by a carriage return.
See Table 3.3 for examples on assigning configuration
parameters.