HP (Hewlett-Packard) 600N Network Card User Manual


 
128 HP JetDirect Configuration Page Messages
EN
UNABLE TO GET NDS
SRVR ADDR
The NDS server address cannot be located or accessed.
UNABLE TO LOGIN A failure was detected when the HP JetDirect print server
tried to log onto the file server. This could be caused by the
print server object not existing on the file server, or because
of a security check that prevents the print server from
logging in.
Make sure the file server name and print server object name
are correct. Use PCONSOLE to erase the password for the
print server object. Create a new print server object.
When the HP JetDirect print server is configured for multiple
file servers, the error is only displayed on the configuration
page if none of the file servers made the connection.
UNABLE TO SENSE
NET NUMBER
The HP JetDirect print server has been trying for over 3
minutes to determine the NetWare protocol used on the
network. Make sure that any file servers and routers are
operating correctly. Make sure that the settings for NetWare
frame type and source routing are correct.
UNABLE TO SET
PASSWORD
A failure was detected when the HP JetDirect print server
tried to set the password for the print server object.
(Whenever the HP JetDirect print server is able to log in
without a password, it sets the password automatically.) This
indicates a networking or security problem. Create a new
print server object.
When multiple file servers are configured, the error is only
displayed on the configuration page if none of the file servers
were successfully connected.
UNDERFLOW ERROR Check the cabling and BNC “T” connectors. If the error
persists, run the power-on self-test: turn the printer off, then
on again. If the error persists, replace the HP JetDirect print
server. For replacement instructions, see the hardware
installation guide for your print server.
UNEXPECTED
PSERVER DATA RCVD
The print server sent some data when the HP JetDirect print
server had not given its permission to do so. This indicates
a possible print server problem, possibly a software
problem.
UNICAST PACKETS
RCVD:
Number of frames specifically addressed to this
HP JetDirect print server. This does not include broadcasts
or multicasts.
Table 7.5 General HP JetDirect Messages (14 of 15)
Message Description