Filter
Top Products
EN
HP JetDirect Configuration Page Messages 125
PRINTER NUMBER IN
USE
The printer number assigned to the printer is already in use
by another printer. Assign an unused printer number. This
may also occur when a printer is power cycled, in which case
the error goes away after the print server times out and
detects the lost connection.
PRINTER NUMBER
NOT DEFINED
The printer number you assigned to the remote printer has
not been defined. Assign a valid printer number to the
HP JetDirect print server, or run PCONSOLE and define a
printer number for the print server.
PSERVER CLOSED
CONNECTION
The print server requested a termination of the connection
with the HP JetDirect print server. No error exists or is
indicated. Make sure the print server is running, and restart
it if necessary.
READY The HP JetDirect print server has successfully connected
to the server and is awaiting data.
RECEIVE BUFFER
ERROR
Run the power-on self-test: turn the printer off, then on
again. If the error persists, replace the HP JetDirect print
server. For replacement instructions, see the hardware
installation guide for your print server.
REMOVE RECEIVED The HP JetDirect print server has received a Remove
Adapter data frame during the Token Ring insertion process,
or has received a remove ring station data frame request,
and has removed itself from the ring.
REQUEST PARAM The HP JetDirect print server determines that a Ring
Parameter Server (RPS) is present on the ring, but does not
respond to a request initialization data frame.
RETRY ERROR Verify that the Ethernet network cable is correctly terminated
on both ends. Make sure your HP JetDirect print server is
correctly attached to your network.
RING BEACONING The HP JetDirect print server receives a beacon data frame
after physically inserting into the ring. This indicates a break
in the ring.
RING FAILURE The HP JetDirect print server times out when attempting a
ring purge after becoming the active monitor; that is, the
HP JetDirect print server is unable to receive its own ring
purge data frames.
RING RECOVERY The HP JetDirect print server has received claim token data
frames on the ring. The HP JetDirect print server may be
transmitting the claim token frames.
SECURITY
EQUIVALENCE NOT
SET
The security equivalences for your print server are not set
up properly. Reconfigure your print server.
Table 7.5 General HP JetDirect Messages (11 of 15)
Message Description