Filter
Top Products
110 HP JetDirect Configuration Page Messages
EN
Table 7.1 Novell NetWare Configuration Messages (1 of 2)
Message Description
IPX/SPX STATUS: Indicates the current IPX/SPX protocol status.
DISABLED indicates that IPX/SPX was manually disabled.
READY indicates the HP JetDirect print server is awaiting
data.
INITIALIZING indicates that the print server is registering
the node address or name.
Code is in the middle of a download.
MODE: The mode used by the print server.
QUEUE SERVER indicates that the print server receives
data directly from the queue; REMOTE PRINTER, with the
printer number following it, indicates that the print server
emulates a Novell remote printer. If the printer is not
configured, this field displays QUEUE SERVER.
SOURCE ROUTING: Indicates the current status of source routing.
UNKNOWN is displayed when NetWare source routing is
configured to AUTO, but the source routing method has not
been detected.
NO is displayed when source routing is configured to AUTO,
and the automatic algorithm has determined that source
routing should not be used.
YES is displayed when source routing is configured to
AUTO, and the automatic algorithm has determined that
source routing should be used.
DISABLED, SINGLE R, or ALL RT is displayed when the
user has manually configured source routing through the
printer's control panel or through software.
NODE NAME: Queue Server Mode: The print server name. This name
must match a valid print server on the appropriate NetWare
file server. The default name is NPIXXXXXX.
Remote Printer Mode: The name you gave the network
printer when you configured the network printer. The default
name is NPIXXXXXX.