Filter
Top Products
EN
TCP/IP Configuration 37
c. You must now provide the IP address of the WINS server
by doing the following:
d. Select
Value
, then
Edit Array
.
e. From the
IP Address Array Editor
, select
Remove
to delete
any undesired addresses previously set. Then type in the
IP address of the WINS server and select
Add
.
f. Once the address appears in the list of IP addresses, select
OK
. This returns you to the
DHCP Options
window. If the
address you have just added appears in the list of IP
addresses (near the bottom of the window) return to step
10d. Otherwise, repeat step 10c.
g. In the
DHCP Options
window, select
WINS/NBT Node
Type (046)
from the
Unused Options
list. Select
Add
to
add the node type to the
Active Options
list. In the
Byte
box,
type
0x4
to indicate a mixed node, and select
OK
.
11. Click
Close
to exit to
Program Manager
.
Windows 2000 Server
To set up a DHCP scope on a Windows 2000 server, perform the
following steps:
1. Run the Windows 2000 DHCP manager utility. Click
Start
,
select
Settings
and
Control Panel
. Open the
Administrative
Tools
folder and run the
DHCP
utility.
2. In the DHCP window, locate and select your Windows 2000
server in the DHCP tree.
If your server is not listed in the tree, select
DHCP
and click
the
Action
menu to add the server.
3. After selecting your server in the DHCP tree, click the
Action
menu and select
New Scope
. This runs the
Add New Scope
Wizard.
4. In the
Add New Scope
Wizard, click
Next
.
5. Enter a Name and Description for this scope, then click
Next
.