Filter
Top Products
112 HP JetDirect Configuration Page Messages
EN
Table 7.2 Apple EtherTalk/LocalTalk Configuration Messages
Message Description
APPLETALK STATUS: Current AppleTalk status.
DISABLED indicates that EtherTalk was manually
disabled. LocalTalk is always enabled.
READY indicates that the HP JetDirect print server is
awaiting data.
INITIALIZING indicates that the print server is registering
the node address or name.
LTALK NET: XXXXX
NODE:XXX
ETALK NET: XXXXX
NODE:XXX: X
NET: identifies the AppleTalk Network Number on which
the HP JetDirect print server is currently operating. NODE:
identifies the AppleTalk Node Number that the print server
chose for itself as part of its initialization sequence. PX
identifies the configured EtherTalk network protocol phase.
P1 is the earlier or original version of the EtherTalk
protocol. P2 is the current version of the EtherTalk protocol.
APPLETALK NAME: The name of the printer on the AppleTalk network. A
number after the name indicates that there are multiple
devices with this name, and this is the Nth instance of the
name.
APPLETALK TYPE The type of the printer being advertised on the network.
ETALK ZONE: The name of the EtherTalk network zone on which the
printer is located.
LTALK ZONE: The name of the LocalTalk network zone which the printer
is located.
PORT X STATUS: READY: Print server is awaiting data.
INITIALIZING: Print server is registering the node address
or name/type.