Filter
Top Products
EN
HP JetDirect Configuration Page Messages 127
TRYING TO CONNECT
TO SERVER
The HP JetDirect print server is trying to connect to the print
server or NetWare file server after being configured. Wait
for the print server to establish a connection with the print
or file server.
TURN PRINTER
OFF/ON
This message may appear after you upgrade to a new
version of firmware. When this message appears, turn the
printer off, then back on to enable any new functionality that
was recently downloaded.
UNABLE TO ATTACH
TO QUEUE
A failure was detected when the HP JetDirect print server
tried to attach to one of the queues assigned to the print
server object. This may be because no servers are allowed
to attach to this queue. There may also be a networking or
security problem. Use PCONSOLE to make sure that
servers are allowed to attach to the queue, to delete the print
server object from the list of queue servers if you want the
HP JetDirect print server to service other queues, or to
delete the queue and create a new one (the print server
object must be added to the list of queue servers).
When the HP JetDirect print server is configured for multiple
file servers, the error is only displayed on the configuration
page if none of the file servers made the connection.
UNABLE TO
CONNECT TO
SERVER
Remote Printer mode:
The HP JetDirect print server was
unable to establish an SPX connection with the print server.
Make sure that the print server is running and that all cables
and routers are functioning correctly.
Queue Server mode:
The HP JetDirect print server could
not establish an NCP connection to the file server. Make
sure that the correct file servers are connected.
When multiple file servers are configured, the error is only
displayed on the configuration page if none of the file servers
were successfully connected.
UNABLE TO FIND
SERVER
The HP JetDirect print server was unable to find the
NetWare print server (Remote Printer mode) or file server
(Queue Server mode). (There was no response to service
queries for advertising print servers or file servers that
matched the configured print server or file server name.)
Make sure that the print server or file server is running and
that the print server or file server name configured on the
HP JetDirect print server matches the actual name used by
the print server or file server. Also make sure that all cables
and routers are functioning correctly.
Table 7.5 General HP JetDirect Messages (13 of 15)
Message Description