Filter
Top Products
44 TCP/IP Configuration
EN
where <IP address> is the desired IP address to be assigned to the
print server. The
arp
command writes the entries to the arp cache
on the workstation, and the
ping
command configures the IP
address on the print server.
For example:
●
In Windows NT 4.0 or Windows 2000
arp -s 13.32.8.98 00-b0-60-a2-31-98
ping 13.32.8.98
●
In UNIX
arp-s 13.32.8.98 00:b0:60:a2:31:98
ping 13.32.8.98
Note Once the IP address has been set on the print server,
additional
arp
and
ping
commands will be ignored.
Once the IP address is configured,
arp
and
ping
cannot be used unless the print server is reset to
factory values.
On UNIX systems, the
arp -s
command may vary
between different systems.
Some BSD-based systems expect the IP address (or
host name) in reverse order. Other systems may
require additional parameters. See your system
documentation for specific command formats.