Filter
Top Products
54 TCP/IP Configuration
EN
CFG TCP/IP=NO* Selects whether you want to access the TCP/IP
menu and set TCP/IP protocol parameters.
In the TCP/IP menu, you can specify
BOOTP=YES* for TCP/IP parameters to be
automatically configured by a BootP or DHCP
server when the printer is turned on.
If you specify BOOTP=NO, you can manually set
the following TCP/IP parameters from the control
panel:
■
Each byte of the IP address (IP)
■
Subnet Mask (SM)
■
Syslog Server (LG)
■
Default Gateway (GW)
■
Idle Timeout period (default is 90 seconds, 0
disables the timeout)
CFG ETALK=NO* Selects whether you want to access the EtherTalk
menu and set the AppleTalk phase parameter
(ETALK PHASE=1 or 2) for your network.
Table 3.4 Print Server Parameters (2 of 2)
JetDirect Internal
Print Server Menu
Item
Description