Filter
Top Products
114 HP JetDirect Configuration Page Messages
EN
SNMP GET CMTY
NAME:
ALL or SPECIFIED
Indicates whether or not an IP SNMP get community name
has been configured for the print server. This parameter is
omitted when the print server is configured from the
printer's control panel. ALL indicates that the print server
will accept all SNMP community names for GetRequests.
SPECIFIED indicates that a specific SNMP get community
name is configured.
SNMP SET CMTY
NAME:
NONE or SPECIFIED
Indicates whether or not an IP SNMP set community name
has been configured for the print server. This parameter is
omitted when the print server is configured from the
printer's control panel. NONE indicates that the print server
will not accept any SNMP community names for
SetRequests. SPECIFIED indicates that a specific SNMP
set community name is configured.
BOOTP SERVER The IP address of the system that responds to the print
server's BOOTP request with configuration data. This
parameter is omitted when the print server is not
configured using BOOTP. NOT SPECIFIED indicates that
the server's IP address field in the BOOTP reply packet
was zero.
DHCP SERVER The IP address of the system that responds to the print
server's DHCP request with configuration data. This
parameter is omitted when the print server is not
configured using DHCP.
CONFIG FILE: The name of the HP JetDirect configuration file. The file
pathname may be truncated to fit on two lines. This
parameter is omitted when the print server is configured
from the printer's control panel. NOT SPECIFIED indicates
that a file was not specified in the BOOTP reply from the
host.
Table 7.3 TCP/IP Configuration Messages (2 of 2)
Message Description