Filter
Top Products
36 TCP/IP Configuration
EN
8. Skip this step if you have assigned unlimited leases in the
previous step. Otherwise, select
Scope
and select
Add
Reservations
to set up your printers as reserved clients. For
each printer, perform the following steps in the
Add Reserved
Clients
window to set up a reservation for that printer:
a. Type the selected IP address.
b. Obtain the MAC address or hardware address from the
configuration page, and type this address in the
Unique
Identifier
box.
c. Type the client name (any name is acceptable).
d. Select
Add
to add the reserved client. To delete a
reservation, in the
DHCP Manager
window, select
Scope
and select
Active Leases
. In the
Active Leases
window,
click on the reservation you want to delete and
select
Delete
.
9. Select
Close
to return to the
DHCP Manager
window.
10. Skip this step if you are not planning to use WINS (Windows
Internet Naming Service). Otherwise perform the following
steps when configuring your DHCP server:
a. From the
DHCP Manager
window, select
DHCP Options
and select one of the following:
Scope
— if you want Name Services only for the
selected scope.
Global
— if you want Name Services for all scopes.
b. Add the server to the
Active Options
list. From the
DHCP
Options
window, select
WINS/NBNS Servers (044)
from
the
Unused Options
list. Select
Add
, then select
OK
.
A warning may appear requesting that you set the node
type. You do this in step 10d.