Filter
Top Products
EN
Troubleshooting the HP JetDirect Print Server 83
Resetting to Factory Defaults
Parameters on the HP JetDirect print server (for example, the
IP address) can be reset to factory default values using the following
procedures:
●
HP LaserJet Printer with Internal (MIO/EIO) Print
Server
Reset the HP JetDirect internal print server by resetting the
printer. For instructions on resetting your printer, see the printer
manuals.
CAUTION Resetting the printer will reset
all
printer settings
to their factory defaults. After resetting the printer,
you may need to use the printer's control panel to
reconfigure printer settings that are required by
users.
●
HP JetDirect External Print Servers
Reset the HP JetDirect external print server by holding down the
[Test]
button on the print server while connecting the power cord.
After resetting the HP JetDirect print server, you may need to
reconfigure your computers for printing.